Everyone without killer skatespots in the neighbourhood, don't worry anymore. This rail is fast, cheap and easy.
All you need is:
- 1 or 2 big blocks of wood
- A small metal pipe/rail
- A hammer and nails
- An electric drill
To start, drill some holes in the metal pipe.
Put screws in the holes you just drilled, put the pipe on the blocks, and screw the pipe onto the blocks.
If you did it right you'll have the base of the rail. Just one more thing to do!
Take a flat piece of wood to use hammer and nails to attach it to the bottom of the blocks. Make sure the bottom is really flat, or your rail will be wobbly.
To make the rail a little more stable, you can put some bricks on the base plate to hold it down.
You're ready to grind and slide!
Join the fun!
Create your own free skateboard profile with image and video gallery now in less than 2 minutes!
Members can post comments, vote in polls and open new discussion topics.
And best of all, we reward all our active members with free skateboard stuff from our member shop, where everything is completely free!