Fs 360 boneless trick tip

The thing that makes a 360 boneless so much more difficult than a 180 boneless, is that you need enough time (height) to rotate 360 degrees.

(Video by Josh)

1
Start in about the same position as a regular boneless. You can put your back foot a little more towards the heel side to help with the 360.

2
Crouch down and grab the middle of the toeside of your board with your back hand.

3
Slide your front foot off the board and immediately use that leg to jump as high as you can. You'll need enough height so you enough time for the rotation.

Swing your body hard to rotate 360 degrees. Jumping 360 degrees from this position can be difficult, but you'll get it with some practice.

Keep holding on to the board.

4
At about 270 degrees, make sure your front foot is back on the board.

5
Release the board, and land with your legs slightly bent. If you only rotated 350 degrees, pivot the other 10 degrees.

Tips

This can be done frontside or backside.
Watch out, if you only rotate 270 degrees, things can get nasty.

Please press "Like" if this helped you

Sweet Post Man! (Y)

Sweet Post Man!

chsk8
4 years ago

if you grind on the board and not the trucks it realy helps if you wax the rail. :)

if you grind on the board and not the trucks it realy helps if you wax the rail.

sk8erdavve
4 years ago

thank you. Sk8 to live live to sk8

grmreaper24
3 years ago

nice thanks i wanna do it bs tho

tre_flipper
3 years ago

wannenburg
2 years ago

wierd trick hard too

JayJay15
2 years ago

tight

BlkSkaterboi23
2 years ago

sweet! (H)

sweet!

awesomesause10
6 months ago

sweet

sickerskater12
5 months ago

[quote=sk8erdavve]if you grind on the board and not the trucks it realy helps if you wax the rail. :) [/quote] this isnt grinding its a boneless 360 (N)

sk8erdavve said:
if you grind on the board and not the trucks it realy helps if you wax the rail.

this isnt grinding its a boneless 360